Space Marines – Emperor’s Spears

This week we’ve got a member of the Emperor’s Spears Space Marine chapter. I’ve been quite fond of the colour scheme for this chapter since first seeing it, and after having done it, I think it’s my favourite so far. The paints themselves had great coverage and were easier to work with than some of the less opaque ones (I’m talking about you, orange!). The result is one that I’m really happy with, not to mention a few sessions back painting has improved my brush control noticeably, and my ability to get paint where I actually wanted (most of the time!) is much improved.

Picture time:

Space Marine Emperor's Spears - 1
Space Marine Emperor's Spears - 2
Space Marine Emperor's Spears - 3
Space Marine Emperor's Spears - 4

I don’t have much to say about this guy other than I’m pretty happy with the end result. I used a grey basecoat again, but it worked much better with this colour scheme than it did with orange or yellow. I’m also happy with my whites, and I think this is a recipe I’ll use in future (although I’ll go a little heavier with the white highlight in future). The shades are subtle but visible, and it looks like white, rather than badly painted grey as I usually end up with.

I think I’m going to go for something a little different next week. For one, I’ve run out of Space Marine chapters that I want to paint – I’m open to suggestions as I’ve still got half a box of them left! The second reason is I’ve a tonne of fantasy minis that I want to paint, so one of them will be getting the treatment over the next few days!

Space Marines 10 – Relictors

The final Space Marine in my box is painted in the colour scheme of the Relictors. This is the second time in a row I’ve thrown my reluctance to use true metallic paints to the wind, this time with a silver colour scheme. Once again, these Vallejo paints are a joy to use, although need to be treated a little different to regular acrylics, something I’m still practising with.

I’ve not got a whole lot to say about this guy. He was fun to paint, and admittedly looks a little bit like a Cylon! On to the photos!

I didn’t mess around too much with this guy. I stuck to black for the recess shading, which looks solid, the eyes are good – I’ve kinda got these down now, at least when I have a steady enough hand to get them right – and the little go-fasta stripes on his chainsaw look pretty nicely highlighted too!

All tips, trick, hints, and constructive criticism is appreciated, so feel free to message me in the comments, or over on Facebook. If you want to take a look at the previous parts of this series, you can find them at these links: Part 1 – UltramarinesPart 2 – Blood AngelsPart 3 – Imperial FistsPart 4 – SalamandersPart 5 – Dark AngelsPart 6 – White ScarsPart 7 – Hawk LordsPart 8 – Iron Hands, Part 9 – Golden Gryphons.

This will be my last painting post for a few weeks, as we’re in lockdown at the moment, and I don’t have my painting stuff with me at the moment. I’ve a couple more marines from the newer style set painted and ready for photos, and a selection of other chapter colours to finish out that box with. After that, I hope to move on to some fantasy minis!

As lockdown continues, hopefully we’re starting to turn the corner here, and life will be able to get back to normal in the not too distant future for us and everyone else. I hope everyone is well, taking care of themselves, and sticking to the rules to keep themselves healthy. It’s tough, but I think the light is starting to appear at the end of the tunnel!

Space Marines 9 – Golden Gryphons

The ninth part of this series, and penultimate model in this box, is a member of the Golden Gryphons chapter of Space marines. I’m doing something a bit different with this guy. I’ve mentioned before how I don’t really like true metallic paints on this type of model, but decided to try them.

I came across a series of Vallejo true metallic paints that really produce a great result. I can never get the end result I want from the regular acrylic ones. The Golden Gryphon’s name gives away the colour scheme, which is of course gold. It’s the largest amount of true metallic painting I’ve done in a long time, so was a bit of trial and error. On to the photos!

Space Marines 9 -Golden Gryphon 1
Space Marines 9 -Golden Gryphon 2
Space Marines 9 -Golden Gryphon 3
Space Marines 9 -Golden Gryphon 4

The glaring issue with this Golden Gryphon is that I started off the recess shading with a brown ink. I think it looked, well, completely crap, but it was too late to change it. I should have overpainted it with gold again, but I hoped the black ink I switched to would cover it. It didn’t, hence the brown, uh, rust stains…

Other than that, I’m pretty happy with this guy. The gold metallic paint was a joy to work with. I usually find metallics a frustrating misery of too gloopy or too thinned down meaning poor metallic consistency. The contrast on the eyes is nice and the green works well against the gold. Were it not for the shading error, I think this Golden Gryphon would look pretty good.

I still need to practice with these new metallic paints, as they behave a bit differently to regular acrylics. They really don’t seem to like a wet palette, and the ropey paint job on the gun is my fault rather than the paint’s. I like these paints, so will start to use true metallics a bit more than I have in the past.

All tips, trick, hints, and constructive criticism is appreciated, so feel free to message me in the comments, or over on Facebook. If you want to take a look at the previous parts of this series, you can find them at these links: Part 1 – UltramarinesPart 2 – Blood AngelsPart 3 – Imperial FistsPart 4 – SalamandersPart 5 – Dark AngelsPart 6 – White ScarsPart 7 – Hawk Lords, Part 8 – Iron Hands.

I hope everyone is keeping well, and doing their best to keep busy if they’re on lockdown! We were on a limited one for two weeks, but are now on day 3 of a full one!

Space Marines 8 – Iron Hands

First, I hope everyone is healthy, and following all the guidelines on how to remain so! Space Marine Number 8 is a member of the Iron Hands, which means the colour of the week is black.

There are a number of different approaches to shading and highlighting black, with greys and blues being two of the most popular. I’ve also seen purple used to good effect. The main danger that I’ve encountered with black is how to highlight it without it ending up looking like it’s grey. I’ve never been a fan of the blue highlighting approach, so I went with grey.

Overall, I’m pretty happy with how this one turned out. He still looks like his armour is black, but the highlights have worked reasonably well at the same time.

The photos:

Space Marines 8 - Iron Hands 1
Space Marines 8 - Iron Hands 2
Space Marines 8 - Iron Hands 3
Space Marines 8 - Iron Hands 4

One of the changes to my approach on this member of the Iron Hands is how I approached highlighting the pauldrons. I went for a circular highlight on the top part, treating it as a sphere, and left it at that. I think looks far better than the approach I was taking of treating it like a combined sphere and cylinder.

Again, I’ve started to do a little more edge highlighting on this guy. This is a technique I’m liking more and more on these models. It’s also one I’m using exclusively on my next set of marines. It’ll be interesting to compare the two approaches!

As always, all tips, trick, hints, and constructive criticism is appreciated, so feel free to message me in the comments below, or over on Facebook. If you want to take a look at the previous parts of this series, you can find them at these links: Part 1 – UltramarinesPart 2 – Blood AngelsPart 3 – Imperial FistsPart 4 – SalamandersPart 5 – Dark AngelsPart 6 – White Scars, Part 7 – Hawk Lords.

As a final note, for the quarantine, I made The First Blade of Ostia free for a few days. Today is the last day of the free run, so make sure you grab a copy while you can! Take care of yourselves!

Amazon US

Space Marines 5 – Dark Angels

We’re now halfway through my first box of Space Marines of the old school variety. This time around I went with a Dark Angel’s colour scheme. As always, I use Vallejo Paints, not GW ones, so I have to come up with an approximate colour match.

In terms of colour scheme, I think I got the colour values for the highlights and shades to a pretty good place, but as usual the photos really show up my clumsy highlight transitions. As I’m moving into my next models, I’ll be paying a lot of attention to improving on this. The shoulder pads continue to be an issue. I think I’ll switch to a round highlight on the top for this in future, as I don’t think the approach I’ve been taking really works, and that’s particularly apparent on this model.

The black wash I used to darken the recesses are a bit shiny in places, and caught some reflection from my flash in the photos, so there appear to be some white spots in them that aren’t actually there. I might try finishing with a matte varnish in future to prevent this.

I’m particularly happy with the lens on the gun on this one – it worked out particularly nicely, so this approach is one I’ll use from now on. It’s 4 tones, with a white spot, rather than the 3 I usually use, and I think that darker to lighter transition really improves the effect.

So, to the photos!

Space Marines 5 - Dark Angels Front
Space Marines 5 - Dark Angels Right
Space Marines 5 -Dark Angels Left
Space Marines 5 -Dark Angels Back

Finally, the sharper eyed may notice I’ve changed my approach a little on this guy, using metallic metal paint for the first time in the series so far, with the gun barrel and clip painted in it.

As always, if you’ve got any hints or tips for painting Space Marines, or minis in general, please feel free to leave a comment below, or send me a mail via my contact page.

You can find the other parts of this series at these links: Part 1- Ultramarine, Part 2 – Blood Angel, Part 3 – Imperial Fist, Part 4 – Salamander.

Space Marines 4 – Salamanders

Space Marine Number 4 is a Salamander, which is a light green colour scheme. Overall this wasn’t a difficult colour to work with, and I’m pretty happy with the tonal range I had – as a reminder, I don’t use GW paints as I don’t own any, so have to work out an approximate paint recipe from the range I do have.

The main issue with this guy is that the photos really expose how rough my blends are, not just in transition but also in shape and smoothness. This is something I really have to work on, but I think brush control is a large part of this, and it only improves with a lot more practise!

The other thing I didn’t get right here, which I usually make a reasonable job of, is the eye lenses. I don’t have a strong enough transition of colours here, and they’re too light as a result. It was the first yellow lens I’ve painted, so live and learn!

The weapon and chest logo are non metallic metal. The barrel of the flame thrower was a bit of a challenge, and to be honest I think it looks slightly better in the photo than in reality. I get the idea behind how reflections should work on NMM objects, but I can never seem to get them to look quite as good as they do on Youtube videos!

Time for photos!

Space Marine Salamander 1
Space Marine Salamander 2
Space Marine Salamander 3
Space Marine Salamander 4

I still struggle a bit to work out where to highlight, and in my next batch will focus on the edge highlighting technique. It kind of defeats the purpose of using these as a practise vehicle for highlighting, but I want to see what type of a result I can get with the edge highlighting!

You can find the other parts ofthis blog series here: Part 1 – Ultramarine, Part 2 – Blood Angel, Part 3 – Imperial Fist.

As always, feel free to send any hints or tips you might have, they’re always appreciated! Also, if anyone has any suggestions on chapter colour schemes for my next box of marines, let me know!

Space Marines 3 – Imperial Fists

In the third instalment of my Space Marine painting adventure, I’ve painted an Imperial Fist. Yellow is the colour of the day with this guy, which presented its own set of challenges, some down to the nature of the colour, and some self-inflicted.

I’ve a few initial comments to make on this one. The first thing is that I usually undercoat my models with a black rattle can spray. I think I’m going to pick up a can of mid grey and a can of white, and experiment with these a bit when I’m painting models of a mainly bright colour. I’ve read that once you get to 3-4 coats (which I do anyway), any effect of the undercoat is minimal, but I think I’ll try it anyway to see if it makes life any easier.

The next thing is that I’ve started to use a wet palette, and an acrylic thinner medium instead of plain tap water to thin my paints. The issue I had here was that I didn’t mix the thinner through the yellow well enough, meaning I got the nice saturated sunburst yellow colour in places (see the pauldrons), and a milky, chalky yellow in others (see the gun and leg plates).

Now, on to the photos!

The yellow colour represented less of a challenge with the photography, rather than me doing anything different, and getting things right!

Another painting mistake I made with this one is that after the initial 4 layers of thinned yellow base coat, I washed the entire model in a sepia ink. That’s given the flat panels a bit of a muddy effect in places. In future, I’m going to try and keep this application as precisely to the seams and recesses as I can, which I should have done from the start…

As always, if anyone has any comments, tips, or painting experiences they’d like to share, feel free to drop them in the comments box below. If you want to take a look at my previous efforts, here are the links to Part 1 and Part 2!

Space Marines 1 – Ultramarine

I had a little painting time over Christmas, so I decided to paint up a box of Space Marines. With so many chapters to choose from, I decided to paint each in a different chapter colour. The idea was that they’d be a good opportunity to practise shading and highlighting different colours! To the photos:

I decided to go with an Ultramarine for my first attempt. I don’t use the official paints, as I already have the full range of Vallejo paints still left from when I used to paint a lot. I’m afraid I didn’t take WIP photos for these, so only have the finished results.

I don’t like metallic metal paints on small fantasy models (I do use them on historicals, though), so this guy gave me the chance to try gold non metallic metal. The NMM steel on the gun ended up looking more like some kind of polymer/resin, but I quite like this look.

I painted each major part separately before assembly, which was a mistake, as the highlights don’t match up. This is most noticeable on the shoulder pads. I still do that a bit now, but pay more attention to this issue.

Overall, I’m happy with how he turned out. The shades and highlights are still a little clunky, but I’ll only improve on that with practice. My brush skills are slowly improving, and I think my colour choices got pretty close to what I was looking for in the end result.

I’m still finding photography to be an issue, and I’m struggling to get a decently exposed image. I’ve boosted the brightness a bit in post-processing to help, but that’s the only alteration I’ve made. Any suggestions on that are more than welcome, as are any on how to improve in the paintwork!